Hi Community,
We have a distributed collector in a remote location. We have established a Site-to-site VPN between locations. The scenario is that the IP Address of the collector is in NAT and mapped to a different IP than that of the actual host IP.
For E.g the system IP of collector is 172.29.20.80 and the IP of the collector as seen by the Remote Logpoint is 172.22.2.2.
We have made the necessary configuration and ensured the Collector is visible in the logpoint. However, the IP as recorded by Logpoint is the actual system IP (Not the IP Logpoint should recognize it as). The issue is the status is Inactive stage.
Is this due to the difference in host IP and NAT address?
Best answer by Srijan Kafle
View original